Gr2 Vivoil Vivolo Industrial Reversible Gear Motor G12 + Drain G04 - 22cc

We recommend using any gear pumps at speed higher than 1000rpm and pressures not exceeding 220bar continuously to ensure longevity.

Series: XV-2M XM207 Ø36.5 Flange – Taper Shaft
Type: 22.00cc
Group: Group 2
Category: Reversible Industrial Motor
Cover with External Drainage – 1/4” BSP = G04
Displacement: 22.80 cm³/rev
Shaft: CO001 – Tapered 1:8 – Ø17.4 – M12x1.5 – key thk. 4 – T.2 Nm 233.2
Flange: Ø36.5 Standard European Reversible rotation
Inlet and Outlet Ports: 3/4” BSP = G12
Torque | Power (1000 rev/min 100Bar): 30.84Nm 3.23KW
Always make sure that the torque is less than or equal to the admissible torque of the shaft.
Max Pressure: 240Bar
Max Working Pressure: 200Bar
Max Drain Pressure: 6Bar
Min Starting Pressure: 15Bar
Min Speed: 700 rev/min
Max speed: 3000 rev/min
Type of Fluid to be used: Mineral-based hydraulic oil HLP HV
Recommended Viscosity: 20mm²/s – 100mm²/s
Recommended Fluid Operating Temp: 30°C ~ 50°C
Constructive Features:
Motor Body: Extruded alloy Series 7000, heat treated and anodized.
Flange and Cover: Die-cast aluminium alloy, heat treated and anodized
Gear Bush Bearings: Special heat-treated tin alloy, high anti-friction capacity.
Gears: UNI 7846 Steel
Seals: A727 Standard Acrylonitrile
Back-up Rings: Virgin PTFE, Tecnil Q3
Torque Settings
Rear Bolts: 40-50Nm
Nut on Shaft: 40Nm Max

Other known codes: XV-2M/22, X2M5501E, X2M5501ECCE, VI-XV2M22-BT

PLEASE NOTE THAT COURIER COST MAY NOT BE 100% ACCURATE ON HOSE ASSEMBLIES OR BULK, IT IS ADVISED TO REQUEST COURIER COST SEPERATE UPON ORDERING.  YOU ARE WELCOME TO CALL OR EMAIL TO GET ACCURATE COSTING ON COURIER PRIOR TO ORDERING.
Items in stock may sometimes differ slightly from those in the pictures, but they are functionally the same.